1.It adopts the combination of pneumatic components and sliding block to control up and down of device.
2.The special steel guide groove can change the specification between different blades easily,which just changes the passing groove.
3.The use of flat piece and concave piece will achieve the best effect.
4.The device is installed in the side(the initial needle position or the end needle position).
1.Space of sequin device: 80mm
2.Lifting traveking: 30mm
3.Sequin embroidery speed:
¢ 3mm --- 4mm --- ¢ 5mm 1000 r / min
¢ 6.75mm----- ¢ 9mm 800 r / min
4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm, ¢ 9mm
5. Specifications of stepping motor: 0.5A or 1A
6.The use of air pressure: 3kpa